Allied Telesis AT-S63 - Manual (Page 805)

AT-S63 Management Software Menus Interface User’s Guide
Section IX: Management Security 805
Adding a Certificate to the Database
After creating a certificate or receiving a certificate from a public or private
CA, you need to add it to the certificate database. This makes it available
to the switch’s web server. A certificate in the certificate database appears
in the X509 Certificate Management menu.
To add a certificate to the certificate database, perform the following
procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 7 to select Keys/
Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 260 on
page 775.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown in
Figure 266 on page 802.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2 to
select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 267 on
page 802.
5. From the X509 Certificate Management menu, type 2 to select Add
Certificate. The Add Certificate menu is shown in Figure 269.
Figure 269. Add Certificate Menu
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Add Certificate
1 - Certificate Name .............
2 - State ........................ Trusted
3 - Type ......................... EE
4 - File Name ....................
5 - Add Certificate
R - Return to Previous Menu
Enter your selection?