Allied Telesis AT-S63 - Manual (Page 323)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 323
Displaying Port CoS Priorities
The following procedure displays a menu that lists the current CoS priority
level for each port.
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 5 to select Class of
Service (CoS).
The Class of Service (CoS) menu is shown in Figure 98 on page 317.
3. From the Class of Service (CoS) menu, type 4 to select Show Port
CoS Priorities.
The Show Port CoS Priorities menu is shown in Figure 102.
Figure 102. Show Port CoS Priorities Menu
The PVID column displays the identifier of the VLAN where the port is
an untagged member.
The Priority column displays the temporary priority level assigned to
ingress untagged packets on the port.
The Override Priority column indicates whether the priority level in
ingress tagged frames is being used or not. If No, the override is
deactivated and the port is using the priority levels contained within the
frames. If Yes, the override is activated and the tagged packets are
assigned the temporary priority level shown in the Priority column.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Port CoS Priorities
Port PVID Priority Override Priority
---------------------------------------------
01 1 0 No
02 1 0 No
03 1 0 No
04 1 0 No
05 1 0 No
06 1 0 No
07 1 0 No
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?