Allied Telesis AT-S63 - Manual (Page 345)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 345
Figure 111. Modify Flow Group Menu
6. Modify the settings as needed.
When you modify a flow group, note the following:
ˆ You cannot change the flow group ID number.
ˆ To delete a value from a variable so as to leave it blank, select the
variable and then use the backspace key to delete its default value.
ˆ Specifying an invalid value for a parameter that already has a value
causes the parameter to revert to its default value.
7. Type M to select Modify Flow Group.
8. To modify another flow group, repeat this procedure starting with step
4. To assign the flow group to a traffic class, go to “Managing Traffic
Classes” on page 350.
9. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
Deleting a Flow
Group
To delete a flow group, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 108 on page
341.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify Flow Group
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - ToS ........................
7 - Move ToS to Priority ....... No
8 - Move Priority to ToS ....... No
9 - Classifier List ............ 11
M - Modify Flow Group
R - Return to Previous Menu