Allied Telesis AT-S63 - Manual (Page 306)

Chapter 14: Access Control Lists
306 Section II: Advanced Operations
Deleting an ACL
This procedure deletes an ACL from the switch. To perform this
procedure, you need to know the ID number of the ACL. To display ACL
ID numbers, refer to “Displaying ACLs” on page 309.
To delete an ACL, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
2. From the Security and Services menu, type 4 to select Access Control
Lists.
The Access Control Lists (ACL) menu is shown in Figure 92 on page
301.
3. From the Access Control Lists (ACL) menu, type 3 to selection Destroy
ACL.
The following prompt is displayed:
Available ACL(s): 0-15
Enter ACL ID : [0 to 255] -> 0
4. Enter the ID number of the ACL you want to modify. You can modify
only one ACL at a time.
The Destroy ACL window is displayed with the specifications of the
selected ACL. You can use this window to confirm that you are
deleting the correct ACL. An example of the window is shown in Figure
95.
Figure 95. Destroy ACL Menu
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Destroy ACL
1 - ACL ID ............ 25
2 - Description ....... UDP-deny
3 - Action ............ Deny
4 - Classifier List ... 32
5 - Port List ......... 15,22
D - Destroy ACL
R - Return to Previous Menu
Enter your selection?