Table 27: 802.1q-compliant multiple vlan example – Allied Telesis AT-S63 User Manual
Page 651
AT-S63 Management Software Menus Interface User’s Guide
Section VI: Virtual LANs
651
A user-designated port on the switch functions as an uplink port, which
can be connected to a shared device such as a router for access to a
WAN. This port is placed as a tagged port in each VLAN. Thus, while the
switch ports are separated from each other in their individual VLANs, they
all have access to the uplink port.
The uplink port also has its own VLAN, where it is an untagged member.
This VLAN is called Uplink_VLAN.
Note
In 802.1Q Multiple VLAN mode, the device connected to the uplink
port must be IEEE 802.1Q-compliant.
An example of the 802.1Q-compliant VLAN mode is shown in Table 27.
The table shows the VLANs on an AT-9400 Series switch where port 22
has been selected as the uplink port.
Table 27. 802.1Q-Compliant Multiple VLAN Example
VLAN Name
VID
Untagged Port
Tagged Port
Client_VLAN_1
1
1
22
Client_VLAN_2
2
2
22
Client_VLAN_3
3
3
22
Client_VLAN_4
4
4
22
Client_VLAN_5
5
5
22
Client_VLAN_6
6
6
22
Client_VLAN_7
7
7
22
Client_VLAN_8
8
8
22
Client_VLAN_9
9
9
22
Client_VLAN_10
10
10
22
Client_VLAN_11
11
11
22
Client_VLAN_12
12
12
22
Client_VLAN_13
13
13
22
Client_VLAN_14
14
14
22
Client_VLAN_15
15
15
22
Client_VLAN_16
16
16
22
Client_VLAN_17
17
17
22
Client_VLAN_18
18
18
22