Allied Telesis AT-S63 - Manual (Page 200)

Chapter 10: File System
200 Section II: Advanced Operations
ˆ “Selecting the Active Boot Configuration File for the Switch” on
page 202
Creating a Boot Configuration File
To create a boot configuration file that contains the switch’s current
configuration, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 9 to select System
Utilities.
3. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is shown in Figure 53.
Figure 53. File Operations Menu
Note
Item 9, Format Flash Drive, and item F, Display Flash Information,
are described in “Working with Flash Memory” on page 215. Item C,
Display Compact Flash Information and item D, Compact Flash
Directory Configuration are described in “Working with the Compact
Flash Card” on page 217.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
File Operations
1 - Boot Configuration File ......... boot.cfg (Exists)
2 - Current Configuration ........... boot.cfg
3 - Create Configuration File
4 - Copy File
5 - Rename File
6 - Delete File
7 - View File
8 - List Files
9 - Format Flash Drive
F - Display Flash Information
C - Display Compact Flash Information
D - Set/Change Compact Flash Directory
R - Return to Previous Menu
Enter your selection?