Allied Telesis AT-S63 - Manual (Page 48)

Chapter 2: Starting a Management Session
48 Section I: Basic Operations
If the switch has been assigned a name, the name is displayed below
the switch’s model name.
For information about the command line interface, refer to the AT-S63
Management Software Command Line Interface User’s Guide.
7. To use the menus interface, type menu and press Return.
The Main Menu is shown in Figure 3.
Figure 3. Main Menu
To select a menu item, type the corresponding letter or number.
To return to the command line interface, type C.
When you press the Esc key or type the letter R in a submenu, the
previous menu is displayed.
Quitting a Local
Management
Session
To quit a local management session, return to the Main Menu and type Q
for Quit.
Note
Failure to properly exit from a management session may block
future management sessions until the console timer times out.
You should always exit from a management session when you are
finished managing a switch. This can prevent unauthorized individuals
from making changes to a switch’s configuration if you leave your
management station unattended. For information about how to use the
console timer to automatically disconnect a management session, refer to
“Configuring the Console Timer” on page 74.
Allied Telesyn AT-9424T/GB - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Main Menu
1 - Port Configuration
2 - VLAN Configuration
3 - Spanning Tree Configuration
4 - MAC Address Tables
5 - System Administration
6 - Advanced Configuration
7 - Security and Services
8 - Enhanced Stacking
C - Command Line Interface
Q - Quit
Enter your selection?