Allied Telesis AT-S63 - Manual (Page 532)

Chapter 22: Spanning Tree and Rapid Spanning Tree Protocols
532 Section V: Spanning Tree Protocols
The STP Port Parameters menu is shown in Figure 172 on page 530.
4. From the STP Port Parameters menu, type 2 to select Display STP
Port Configuration. The Display STP Port Configuration menu is
shown in Figure 174.
Figure 174. Display STP Port Configuration Menu
The Display STP Port Configuration menu displays a table that
contains the following columns of information:
Port
The port number.
State
Current state of a port. The possible states are Listening, Learning,
Forwarding, or Blocking when spanning tree is enabled on the switch.
When spanning tree is not enabled on the switch or if a port is not
being used, its state will be disabled.
Cost
Port cost of the port.
Priority
The port’s priority value. The number is used as a tie breaker when
two or more ports have equal costs to the root bridge.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display STP Port Configuration
Port State Cost Priority
-------------------------------------------------------
1
Forwarding 4 128
2 Forwarding 4 128
3 Forwarding 4 128
4 Forwarding 4 128
5 Forwarding 4 128
6 Forwarding 4 128
7 Forwarding 4 128
8 Forwarding 4 128
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?