Allied Telesis AT-S63 - Manual (Page 635)

AT-S63 Management Software Menus Interface User’s Guide
Section VI: Virtual LANs 635
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 199 on page 600.
2. From the VLAN Configuration menu, type 6 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 211 on page 630.
3. From the GVRP Port Parameters menu, type 2 to select Display GVRP
Port Configuration.
The Display GVRP Port Configuration menu is shown in Figure 214.
Figure 214. Display GVRP Port Configuration Menu
The Display GVRP Port Configuration menu provides the following
information:
Mode Normal
A list of ports that process and propagate GVRP information.
Mode None
A list of ports that do not process GVRP information or transmit PDUs.
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display GVRP Port Configuration
GARP Port Parameters
Mode Normal ............. 1-8
Mode None ............... 12,15,21
U - Update
R - Return to Previous Menu
Enter your selection?