Allied Telesis AT-S63 - Manual (Page 715)

AT-S63 Management Software Menus Interface User’s Guide
Section VIII: Port Security 715
Configuring MAC Address Port Security
To set the port security level, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
2. From the Port Configuration menu, type 5 to select Port Security.
The Port Security menu is shown in Figure 239.
Figure 239. Port Security Menu
3. From the Port Security menu, type 1 to select Configure Port Security.
The following prompt is displayed:
Enter Port-List:
4. Enter the port where you want to set MAC address port security. You
can specify one port or a range or ports (for example, 4-8).
The Configure Port Security menu is shown in Figure 240.
Figure 240. Configure Port Security Menu #1
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Port Security
1 - Configure Port Security
2 - Display Port Security
R - Return to Previous Menu
Enter your selection?
Allied Telesyn AT-9424T/SP - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Configure Port Security
Configuring Port Security 4
1 - Security Mode ..................... Automatic
D - Set Default Port Security
R - Return to Previous Menu
Enter your selection?