Allied Telesis AT-S63 - Manual (Page 684)

Chapter 28: MAC Address-based VLANs
684 Section VI: Virtual LANs
5. To add a MAC address to a MAC address-based VLAN, type 1 to
select Add MAC Address. To delete an address, type 2 to select
Delete MAC Address.
The following prompt is displayed:
Please enter VLAN ID -> [1 to 4094] -> 2
6. Enter the VID of the MAC address-based VLAN where you want to
add or delete a MAC address. You can enter only one VID. To display
the VIDs, refer to “Displaying MAC Address-based VLANs” on
page 689.
The following prompt is displayed:
Please enter MAC address ->
7. Enter the MAC address to add to or delete from the VLAN. You can
enter the address in either of the following formats:
xx:xx:xx:xx:xx:xx or xxxxxxxxxxxx
The MAC address is added to or deleted from the VLAN.
8. To add or delete more MAC addresses, repeat this procedure starting
with step 5.
9. To permanently save your changes, return to the Main Menu and type
S to select Save Configuration Changes.
If you added a new MAC address to a new or existing VLAN, perform
the procedure “Adding and Deleting Egress Ports” on page 685 to
assign egress ports to the address.