Allied Telesis AT-S63 - Manual (Page 75)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 75
The View Unicast MAC Addresses section and the View Multicast
MAC Addresses section display unicast and multicast addresses,
respectively. The options function the same in both sections. You can
select only one option at a time.
View All
Displays all dynamic and static unicast or multicast addresses in the
MAC address table.
View Static
Displays just the static unicast or multicast addresses assigned to the
ports.
View Dynamic
Displays just the dynamic addresses learned on the ports.
View MAC Addresses on Port
Displays the dynamic and static MAC addresses of a particular port.
You can specify more than one port at a time.
View MAC Addresses for VLAN
Displays the static and dynamic addresses learned on the tagged and
untagged ports of a VLAN. You specify the VLAN by entering the VLAN
ID number. You can specify only one VLAN at a time.
View MAC Address
Displays the port number where a MAC address was assigned or
learned. In some situations, you might want to know which port learned
a particular MAC address. You could display the MAC address table
and scroll through the list looking for the MAC address, but if the switch
is part of a large network, finding the address could prove difficult. This
option allows you to specify the MAC address and let the AT-S63
Management Software automatically locate the port where the address
was learned.
3. After selecting an option, click View.