Allied Telesis AT-S63 - Manual (Page 147)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 147
accepts the packets that meet the criteria of the classifiers assigned to
the ACL. An action of Deny means the port discards the packets,
unless the packets also match the criteria of a Permit ACL, in which
case the packets are accepted by the port, because a Permit ACL
overrides a Deny ACL.
Active
Whether or not the ACL is active. A status of Yes means that the ACL
is assigned to at least one port on the switch. A status of No means the
ACL is not assigned to any ports and therefore is inactive.
Classifier List
The classifiers assigned to the ACL.
Port List
The port assignments of the ACL.
4. To create a new ACL, click Create.
The Create ACLs page is displayed, as shown in Figure 46.
Figure 46. Create ACLs Page
5. Configure the following parameters:
ID
Use this field to enter an ID number for the ACL. Every ACL on the
switch must have a unique ID number. The range is 0 to 255.
Classifier List
Use the list to select the classifier to be assigned to the ACL. You can
assign more than one classifier to an ACL. To select multiple
classifiers, hold down the Ctrl key while making your selections. To
view the classifiers on a switch, refer to “Displaying the Classifiers” on
page 143. An ACL must have at least one classifier.