Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 139
TCP Flags
Defines a traffic flow by TCP flag. To set this parameter, IP Protocol
must be set to TCP. Options are
ˆ URG - Urgent
ˆ ACK - Acknowledgement
ˆ RST - Reset
ˆ PSH - Push
ˆ SYN - Synchronization
ˆ FIN - Finish
UDP Source Port
Defines a traffic flow by source UDP port. To set this parameter, IP
Protocol must be set to UDP.
UDP Destination Port
Defines a traffic flow by a destination UDP port. To set this parameter,
IP Protocol must be set to UDP.
6. Click Apply.
The new classifier is created on the switch.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.