Allied Telesis AT-S63 - Manual (Page 130)

Chapter 10: Event Logs and Syslog Client
130 Section II: Advanced Operations
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Viewing a Syslog
Output Definition
To view an existing syslog output definition, perform the following
procedure:
1. From the home page, select either Monitoring or Configuration.
2. From the Configuration menu, select the System option.
3. Select the Event Log tab.
The Event Log tab is shown in Figure 33 on page 119.
4. In the Configured Log Outputs section, select a syslog output from the
list and click View.
The View Log Output page is shown in Figure 38.
Figure 38. View Event Log Output Page
For definitions of the parameters, refer to “Configuring a Syslog Output
Definition” on page 127.
5. When you are done, click Close.
Modifying a
Syslog Output
Definition
To modify a syslog output definition, perform the following procedure:
1. From the home page, select Configuration.
2. From the Configuration menu, select the System option.
3. Select the Event Log tab.
The Event log tab is shown in Figure 33 on page 119.