Allied Telesis AT-S63 - Manual (Page 327)

AT-S63 Management Software Web Browser User’s Guide
Secton V: Virtual LANs 327
ˆ Actual: The current untagged ports of the VLAN. If you are not
using 802.1x Port-based Network Access Control, both the
Configured and Actual untagged ports of a VLAN will always be the
same.
If you are using 802.1x and you assigned a Guest VLAN to an
authenticator port or you associated an 802.1x supplicant to a
VLAN on the authentication server, a port can be in different VLAN
than the virtual LAN where it was originally assigned as an
untagged port. In these situations, the Configured and Actual port
lists can differ, with the Actual list detailing the ports that are
currently functioning as untagged ports of the VLAN.
For example, if a port is listed as a Configured member of a VLAN,
but not as an Actual member, that would mean either the port is
currently a part of a Guest VLAN or the supplicant who logged on
the port was associated with a VLAN assignment on the
authentication server.
4. To display the groups of a protected ports VLAN, click the circle next to
the VLAN and click View.
The View Protected VLAN page is shown in Figure 131.
Figure 131. View Protected VLAN Page
The VLAN Details section displays the following information.
VID
The VLAN ID.
Type
The VLAN type which is always Protected.