Allied Telesis AT-WA7400/EU - Manual (Page 96)

Chapter 8: Configuring Ethernet (Wired) Settings
96
Configuring the Guest Interface Settings
The guest interface settings allows a wireless client limited access to the
network, for instance, to the Internet.
To configure the guest interface settings, perform the following procedure:
1. From the main menu, select Advanced > Ethernet (Wired) Settings.
The Ethernet (Wired) Settings page is shown in Figure 30 on page 88.
2. In the Guest Interface Settings section, configure the following
settings:
MAC Address
Shows the
MAC address for the internal interface for the Ethernet port
on this access point. This is a read-only field that you cannot change.
VLAN ID
The ID number of the VLAN associated with the guest.
Subnet
The subnet mask of the subnetwork of which the guest is a member.
3. Click Update to save your changes.