Allied Telesis AT-WA7400/EU - Manual (Page 293)

AT-WA7400 Management Software User’s Guide
293
Get Status on Events
AT-WA7400# get log-entry all
Number Time Priority Daemon
Message
------------------------------------------------------
1 Apr 20 21:39:55 debug udhcpc
Sending renew...
2 Apr 20 21:39:55 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
3 Apr 20 21:37:25 debug udhcpc
Sending renew...
4 Apr 20 21:37:25 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
5 Apr 20 21:34:55 debug udhcpc
Sending renew...
6 Apr 20 21:34:55 info udhcpc
Lease of 10.10.55.216 obtained, lease time 300
Enable Remote Logging and Specify the Log Relay Host for the Kernel
Log
The Kernel Log is a comprehensive list of system even its and kernel
messages such as error conditions like dropping frames. To capture
Access Point Kernel Log messages you need access to a remote syslog
server on the network.
Prerequisites for Remote Logging
To capture Kernel Log messages from the access point system, you must
first set up a remote server running a syslog process and acting as a
syslog log relay host on your network. (For information on how to set up
the remote server, see “Setting Up the Log Relay Host” on page 185.)
Then, you can use the CLI to configure the AT-WA7400 Wireless Access
Point to send its syslog messages to the remote server.
View Log Settings