Allied Telesis AT-WA7400/EU - Manual (Page 288)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
288
examples.
Table 8. Status Commands
Function Command
Understanding Interfaces as
Presented in the CLI Reference of interface names and purposes as described in
“Understanding Interfaces as Presented in the CLI” on
page 276.
Global command to get all detail
on a Basic Service Set (BSS).
This is a useful command to use to
get a comprehensive picture of
how the access point is currently
configured. get bss all detail
Get Common Information on the
Internal Interface for the Access
Point get interface br0
Get All Wired Settings for the
Wired Internal Interface get interface br0
Get Current Settings for the
Ethernet (Wired) Guest Interface get interface brguest
get interface brguest mac
get interface brguest ssid
Get the MAC Address for the
Wired Internal Interface get interface wlan0 mac
Get the Network Name (SSID) for
the Wired Internal Interface get interface wlan0 ssid
Get the Current IEEE 802.11
Radio Mode get radio wlan0 mode
Get the Channel the Access Point
is Currently Using get radio wlan0 channel
Get Basic Radio Settings for the
Internal Interface get radio wlan0
get radio wlan0 detail
Get Status on Events get log-entry all