Allied Telesis AT-WA7400/EU - Manual (Page 312)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
312
Get Current Security Settings After Re-Configuring to IEEE 802.1x Security
Mode
Now use the get command again to view the updated security
configuration and see the results of our new settings.
The following command gets the security mode in use on the internal
network:
AT-WA7400# get interface wlan0 security
dot1x
The following command gets details on how the internal BSS is
configured, including details on Security.
AT-WA7400# get bss wlan0bssInternal detail
Field Value
---------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:0C:41:16:DF:A6
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name wlan0bssInternal
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
open-system-authentication off
shared-key-authentication on
wpa-allow-non-wpa-stations off
wpa-cipher-tkip off
wpa-cipher-ccmp off