Allied Telesis AT-WA7400/EU - Manual (Page 140)

Chapter 12: VLANs
140
Note
The Broadcast SSID you set here is specifically for this Virtual
Network (One or Two). Other networks continue to use the security
modes already configured:
Your original internal network (configured on the Advanced >
Ethernet [Wired] page) uses the Broadcast SSID set on the
Advanced > Security page.
If a Guest network is configured, the Broadcast SSID is always
allowed.
Security Mode
Select the
Security Mode for this VLAN, one of the following:
ˆ Plain text
ˆ Static WEP
ˆ IEEE 802.1x
ˆ WPA/WPA2 Personal (PSK)
ˆ WPA/WPA2 Enterprise (RADIUS)
Note
The Security mode you set here is specifically for this Virtual
Network (One or Two). Other networks continue to use the security
modes already configured.
Your original internal network (configured on the Advanced >
Ethernet [Wired] page) uses the Security mode set on the Advanced
> Security page.
If a Guest network is configured, it always using plain text security
mode.
3. Click Update to save your changes.