Allied Telesis AT-WA7400/EU - Manual (Page 290)

Appendix D: Command Line Interface (CLI) for Access Point Configuration
290
Get All Wired Settings for the Wired Internal Interface
AT-WA7400# get interface br0
Field Value
--------------------
mac 00:a0:c9:8c:c4:7e
ip 192.168.1.1
mask 255.255.255.0
Get the MAC Address for the Wired Internal Interface
AT-WA7400# get interface wlan0 mac
02:0C:41:00:02:00
Get the Network Name (SSID) for the Wired Internal Interface
AT-WA7400# get interface wlan0 ssid
elliot_AP
Get Current Settings for the Ethernet (Wired) Guest Interface
The following example shows how to use the CLI to get the Ethernet
(Wired) settings for the guest interface for an access point. You can see
by the output results of the command that the MAC address is
00:50:04:6f:6f:90
, the IP address is 10.10.56.248, and the
subnet mask is 255.255.255.0.
AT-WA7400# get interface brguest
Field Value
--------------------
type bridge
status up
mac 00:50:04:6f:6f:90
ip 10.10.56.248
mask 255.255.255.0