Allied Telesis AT-WA7400/EU - Manual (Page 91)

AT-WA7400 Management Software User’s Guide
91
2. For the Virtual Wireless Networks setting, select one of the following:
ˆ Select Enabled to enable VLANs for the internal network and for
additional networks. If you choose this option, you can run the
internal network on a VLAN whether or not you have guest access
configured and you can set up additional networks on VLANs using
the Advanced > Virtual Wireless Networks page as described in
Chapter 12, “VLANs” on page 137.
ˆ Select Disabled to disable the VLAN for the internal network, and
for any additional virtual networks on this access point.
3. Click Update to save your changes.