Allied Telesis AT-WA7400/EU - Manual (Page 181)

181
Chapter 17
Maintenance and Monitoring
The maintenance and monitoring tasks described here all pertain to
viewing and modifying settings on specific access points; not on a cluster
configuration that is automatically shared by multiple access points.
Therefore, it is important to ensure that you are accessing the
management software web pages for the particular access point you want
to configure. For information on this, see Chapter 3, “Managing Access
Points and Clusters” on page 43.
This chapter contains the following sections:
ˆ “Monitoring Wired and Wireless LAN Settings” on page 182
ˆ “Viewing the Event Logs” on page 184
ˆ “Viewing the Transmit/Receive Statistics” on page 188
ˆ “Viewing the Associated Wireless Clients” on page 190
ˆ “Viewing the Status of Neighboring Access Points” on page 191
ˆ “Viewing System Information” on page 195
ˆ “Setting the Administrator Password” on page 197
ˆ “Enabling the Network Time Protocol (NTP) Server” on page 200
ˆ “Setting the HTTP Timeout” on page 202
ˆ “Rebooting the Access Point” on page 203
ˆ “Resetting the Configuration to Factory Defaults” on page 204
ˆ “Upgrading the Firmware” on page 205
ˆ “SNMP Firmware Upgrade” on page 207