Allied Telesis AT-WA7400/EU - Manual (Page 335)

AT-WA7400 Management Software User’s Guide
335
Table 30 provides a quick view of QOS commands.
Table 30. QoS Commands
Function Command
Enable/Disable Wi-Fi Multimedia set radio wlan0 wme off
set radio wlan0 wme on
get radio wlan0 wme
About Access Point and Station
EDCA Parameters See “About Access Point and Station EDCA Parameters” on
page 336.
Understanding the Queues for
Access Point and Station See “Understanding the Queues for Access Point and
Station” on page 337.
Distinguishing between Access
Point and Station Settings in QoS
Commands See “Distinguishing between Access Point and Station
Settings in QoS Commands” on page 337
Get QoS Settings on the Access
Point get tx-queue
Get QoS Settings on the Client
Station get wme-queue
Set Arbitration Interframe Spaces
(aifs) On the access point:
set wme-queue wlan0 with queue Queue_Name to
aifs AIFs_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
aifs AIFs_Value
See examples in “Set Arbitration Interframe Spaces (aifs)”
on page 338.
Set Minimum and Maximum
Contention Windows (cwmin,
cwmax) On the access point:
set tx-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
See examples in “Set Minimum and Maximum Contention
Windows (cwmin, cwmax)” on page 339.
Set the Maximum Burst Length
(burst) on the Access Point set tx-queue wlan0 with queue Queue_Name to
burst burst_Value
See examples in “Set the Maximum Burst Length (burst) on
the Access Point” on page 341.