Allied Telesis AT-WA7400/EU - Manual (Page 182)

Chapter 17: Maintenance and Monitoring
182
Monitoring Wired and Wireless LAN Settings
To monitor wired LAN and wireless LAN ( WLAN ) settings, perform the
following procedure:
1. From the main menu, select Status > Interfaces.
The Interfaces page is shown in Figure 53.
Note
On a two-radio access point, current wireless settings for both radio
one and radio two are shown. On a one-radio access point, settings
are shown for one radio. The Interfaces page for a two-radio access
point is shown in Figure 53.
Figure 53. Interfaces Page
This page displays the current settings of the AT-WA7400 Wireless
Access Point.
The wired settings show the Ethernet MAC address, IP address ,
subnet mask , and Associated Network Wireless Name ( SSID ) for the
internal interface.