Allied Telesis AT-WA7400/EU - Manual (Page 188)

Chapter 17: Maintenance and Monitoring
188
Viewing the Transmit/Receive Statistics
To view transmit/receive statistics for a particular access point, perform
the following procedure:
1. From the main menu of the access point you want to monitor, select
Status > Transmit/Receive Statistics.
Note
The following figure shows the Transmit / Receive page for a two-
radio access point. The page for the one-radio access point will look
slightly different.
The Transmit/Receive Statistics page is shown in Figure 55.
Figure 55. Transmit/Receive Statistics Page
This page provides some basic information about the current access
point and a real-time display of the transmit and receive statistics for
this access point as described in the following table. All transmit and
receive statistics shown are totals because the access point was last
started. If the access point is rebooted, these figures indicate transmit/
receive totals since the reboot.
IP Address
IP address for the access point.