Allied Telesis AT-WA7400/EU - Manual (Page 295)

AT-WA7400 Management Software User’s Guide
295
set log relay-host Host_Name_Of_LogRelayHost
Where Host_Name_Of_LogRelayHost is the a DNS name for the Log
Relay Host.
For example:
AT-WA7400# set log relay-host myserver
Specify the Relay Port
To specify the Relay Port for the syslog server:
set log relay-port Number_Of_LogRelayPort
Where Number_Of_LogRelayPort is the port number for the Log
Relay Host.
For example:
AT-WA7400# set log relay-port 514
Review Log Settings After Configuring Log Relay Host
To view the current log settings:
AT-WA7400# get log
Field Value
--------------------------
depth 15
relay-enabled 1
relay-host 10.10.5.220
relay-port 514
From the above output for the get log command, you can identify the
following about the Log Relay Host (syslog server):
ˆ The syslog server is enabled (because relay-enabled is set to 1)
ˆ The syslog server is at the IP address
10.10.5.220
ˆ The access point is listening for syslog messages on the default port
514
Get Transmit / Receive Statistics