Allied Telesis AT-WA7400/EU - Manual (Page 196)

Chapter 17: Maintenance and Monitoring
196
System Up Time
The length of time that the access point has been running since it was
installed or last booted. This is shown in days, hours, minutes, and
seconds.
Telnet Timeout
Displays the length of time that a Telnet session is available before it
times out. You cannot change this parameter.
HTTP Timeout
The length of time that an HTTP session is available before it times out
from inactivity. To change this parameter, refer to “Setting the HTTP
Timeout” on page 202.
System Name
The name for the system that you assigned on the SNMP
Configuration page. To change this setting, refer to “Configuring
SNMP” on page 129.