Allied Telesis AT-WA7400/EU - Manual (Page 63)

AT-WA7400 Management Software User’s Guide
63
Restoring a User
Database from a
Backup File
To restore a user database from a backup file, perform the following
procedure:
1. From the main menu, select Cluster > User Management.
The User Management page is shown in Figure 21 on page 58.
2. In the User Accounts section, click the backup or restore the user
database link.
The Backup or restore the user database for this access point page is
displayed, as shown in Figure 23 on page 62.
3. Select the backup configuration file you want to use, either by typing
the full path and file name in the Restore field or by clicking Browse
and selecting the file.
(Only those files that were created with the User Database Backup
function and saved as .ubk backup configuration files are valid to use
with Restore; for example, wirelessUsers.ubk.)
4. Click Restore .
When the backup restore process is complete, a message is shown to
indicate that the user database has been successfully restored. (This
process is not time-consuming; the restore should complete almost
immediately.)
From the main menu, select Cluster > User Management to see the
restored user accounts.