Samsung UN40D6420UFXZA - Manual (Page 75)

▶ ◀ ▶
English
■ Automatic Network Setup
Use the Automatic Network Settings when connecting your TV to a network
that supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the Network Settings screen.
(MENU m
→ Network → Network
Settings → ENTER E )
2. Select Wired , press ENTER E , and then
press ENTER E again.
3. The network test screen appears and
verifies the network connection. When the
connection has been verified, the “Internet
connection successful.” message appears.
● The displayed image may differ depending on the
model.
Network Settings
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless (General)
WPS(PBC)
One Foot Connection
Connect to the network using
LAN cable. Please make sure
that the LAN cable is connected.