Samsung UN40D6420UFXZA - Manual (Page 287)

▶ ◀ ▶
English
The connected device is not
displayed.
• Check whether or not the device supports Anynet+ functions.
• Check whether or not the HDMI cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
• Search Anynet+ devices again.
• Anynet+ requires an HDMI connection. Make sure the device is
connected to your TV with an HDMI cable.
• Some HDMI cables may not support Anynet+ functions.
• If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat the
device scan.
The TV sound is not output
through the receiver.
• Connect the optical cable between TV and the receiver.
• The ARC function enables digital output of sound using the HDMI
IN 2(ARC) port and can only be operated when the TV is connected
to an audio receiver that supports the ARC function.