Samsung UN40D6420UFXZA - Manual (Page 114)

◀ ▶
English
◀
Manual : Set the current time manually.
N Depending on the broadcast station and signal, the auto time set up
may not be correct. In this case, set the time manually.
– Clock Set : Set the Date and Time .
Select Clock Set . Select Date or Time , and then press ENTER E . Use the
number buttons to enter numbers or press the up and down arrow buttons.
Use the left and right arrow buttons to move from one entry field to the next.
Press ENTER
E when done. To exit Clock Set , select Close , and then
press ENTER E .
N Available only when Clock Mode is set to Manual .
N You can set the Date and Time directly by pressing the number buttons
on the remote control.