2 nxptzt, 1 general, 2 mechanical – Videotec NXPTZT User Manual
Page 73: 3 electrical/video, 4 communications, 5 protocols, 6 environment, 7 certifications
Instruc
tions manual - English - EN
73
MNVCNXPTZT_1343_EN
15.2 NXPTZT
15.2.1 General
AISI 316 stainless steel construction
Passivated and electropolished external surfaces
Quick configuration and setup
Dynamic positioning control system
15.2.2 Mechanical
Pre-wired multipolar cable
Zero backlash
Horizontal rotation: 360° continous
Vertical rotation: -90° to +90°
Horizontal speed (variable): from 0.1° to 100°/s
Tilt speed (variable): from 0.1° to 100°/s
Preset accuracy: 0.02°
6mm glass window
1.5mm thick germanium window
Integrated wiper
Unit weight: 24kg (53lb)
15.2.3 Electrical/Video
Power supply/Current consumption:
• 230Vac, 0.52A max, 50/60Hz
• 24Vac, 5A max, 50/60Hz
• 120Vac, 1A max, 50/60Hz
2 video outputs 75 Ohm 1Vpp (PAL/NTSC)
Functions: Autopan, Preset, Patrol, Tour (maximum 3),
Autoflip
16-character string for zone and preset titling
I/O alarm card:
• 5 alarm inputs
• 2 relay outputs (1A 30Vac/60Vdc max)
15.2.4 Communications
Configuration through OSD
2 half-duplex RS-485 or full-duplex RS-422 serial
interfaces
Firmware updating from console in remote mode
(only VIDEOTEC MACRO and PELCO D protocols)
Up to 999 units, addressable by means of dip-
switches
NXPTZT, IP based control mode:
• Connection Ethernet port LAN 10/100T
15.2.5 Protocols
AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO
D, VIDEOTEC MACRO*
AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO are registered
trademarks.
The product may be interfaced with devices not manufactured by
VIDEOTEC. It is possible that the interface protocols have changed or
are in a different configuration from earlier tested units by VIDEOTEC.
VIDEOTEC recommends a test prior to installation. VIDEOTEC will
not be liable for any installation costs or lost revenues in the event a
compatibility problem will occur.
NXPTZT, IP based control mode:
• Compression H.264/AVC and JPEG
• Two independent video streams
• Image resolution: from Full D1 (720x576 for PAL,
720x480 for NTSC) to 352x240 in 18 steps
• Web Server
• Compatible with ONVIF protocol, Profile S
15.2.6 Environment
Indoor/Outdoor
Operating temperature: From -40°C (-40°F) to +60°C
(140°F)
Installation temperature (not operative):From -40°C
(-40°F) to +60°C (140°F)
Surge immunity: up to 2kV line to line, up to 4kV line
to earth (Class 4)
15.2.7 Certifications
CE: EN60950-1, EN60950-22, EN61000-6-3, EN50130-4
CE: EN55022, Class A
CE: EN60529 IP66
FCC Part 15, Class A