2 configuration via osm, 3 main menu, 4 language – Videotec NXPTZT User Manual
Page 30: 5 camera menu
EN - English - I
nstruc
tions manual
30
MNVCNXPTZT_1343_EN
9.1.2 Configuration via OSM
The screens for configuring the product are
illustrated below.
9.1.3 Main menu
MAIN MENU
------------------------
1>LANGUAGE >
2 CAMERA >
3 MOTION >
4 DISPLAY SETUP >
5 OPTIONS >
6 DEFAULT >
7 INFO >
Fig. 41
9.1.4 Language
LANGUAGE MENU
------------------------
1>ITALIANO
2 ENGLISH OK
3 FRANCAIS
4 DEUTSCH
Fig. 42
9.1.5 Camera menu
1. Configuration: Sets one of the default
configurations for the SONY module:
• Standard: Sets the standard operating mode
for the camera.
• Low Light: Sets the operating mode for dimly
lit environments.
• Far Mode: Sets the operating mode for large
areas. It enables the proportional zoom and
the digital zoom.
• Custom: Signals that the user has manually
selected the parameters of the camera.
2. Area titling: Allows access to the area titling
submenu.
3. Masking: Allows access to the dynamic masking
submenu.
4. Advanced: Allows access to the advanced
settings submenu of the SONY module.
CAMERA
------------------------
1>CONFIG.: STANDARD
2 ZONE TITLING >
3 MASKING >
4 ADVANCED >
Fig. 43