9 configuration, 1 osm interface (on screen menu), 1 using the osm – Videotec NXPTZT User Manual

Page 26: 1 how to use the joystick

EN - English - I

nstruc

tions manual

MNVCNXPTZT_1343_EN

9 Configuration

The product can be configured through the OSM

interface (text on analogue video signal), web

interface (through a browser) and VMS VIDEOTEC

software (installed on a PC).

9.1 OSM interface (On Screen

Menu)

Only for product analogue versions.

9.1.1 Using the OSM

During the normal operation of the unit it is possible

to activate the On Screen Menu in order to set the

advanced functions using the corresponding keys.

For further information, refer to the manual of the

keyboard in use. For further information refer to the

relative chapter (11.13 Special controls, page 65).
Exit the On Screen Menu with Zoom Wide (or Zoom-).

This is a dynamic self-configuration menu

based on the Pan & Tilt model.

9.1.1.1 How to use the joystick

All operations in the menus are carried out using the

joystick.

Down

Left

Right

Fig. 28

Exit

Confirm

Fig. 29

If using a control keyboard with a dual axis

joystick, use the Zoom Wide and Zoom

Tele keys to carry out the Exit and Confirm

commands.

This manual is related to the following products: