Videotec NXPTZT - Manual (Page 28)

EN - English - I
nstruc
tions manual
28 MNVCNXPTZT_1343_EN
9.1.1.4 How to change the numeric fields
Move the cursor to the parameter to be changed and
confirm.
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+ 0.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
Fig. 34
The first digit in the numeric field to be changed will
flash and the last line of the display will show the
accepted limits for the field. Move in the field (left
and right) and change the sign or the numeric value
(up and down).
EDIT PRESET
------------------------
1 NR. : 1
2 ON : N
3>PAN :+000.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
min:-180.00 max:+179.99
Fig. 35
After making the change, confirm. The cursor returns
to the left and the modified figure stops flashing.
The field will be forced to the minimum or maximum
allowed value if you try to insert a value outside the
limits.
9.1.1.5 How to change text
Move the cursor to the parameter to be changed and
confirm.
EDIT ZONE
------------------------
1 NR : 1
2 START:+ 0.00
3 STOP :+ 0.00
4>TEXT :TXT AREA1
Fig. 36
The text editing display will open. The arrow symbol
will position itself under the character that can be
edited while the cursor > positions itself to the right
of the character to be entered.
EDIT TEXT: AREA
------------------------
Text: TEXT AREA1
↑
>A B C D E F G ERASE
H I J K L M N SAVE
O P Q R S T U EXIT
V W X Y Z 0 1 abc
2 3 4 5 6 7 8
9 : ; . , ? !
‘ + - * / = “
< > SPACE ← →
Fig. 37