Videotec NXPTZT - Manual (Page 56)

EN - English - I
nstruc
tions manual
56 MNVCNXPTZT_1343_EN
9.3.3 Device Parameters
From menu entry Device Parameters it is possible
to set the name of the pan & tilt and view other
additional information.
Fig. 106
9.3.4 Device Statistics
From menu entry Device Statistics all of the statistics
are gathered during Pan & Tilt operation are provided
in read-only mode.
Fig. 107
9.3.5 Network Configuration
From menu entry Network Configuration it is possible
to change the setting of the Pan & Tilt network. It is
possible to decide whether the device requires an
address assigned statically or dynamically with DHCP.
The device supports the Internet Protocol (IP) in
version 4.
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
Fig. 108
It is also possible to specify if the device needs to be
synchronised with an external NTP (Network Time
Protocol) server.
• NTP -> DISABLED: Select this option if you do not
wish to synchronise date and time of the device.
• NTP -> STATIC: Select this option if you wish to
synchronise date and time of the device with those
of the NTP server specified by the static address.
For the device to operate correctly, the pan
& tilt must be synchronised with the VMS
software using an NTP server.