Videotec NXPTZT - Manual (Page 51)

Instruc
tions manual - English - EN
51 MNVCNXPTZT_1343_EN
9.1.12.8 Thermal Analysis Menu (Isotherm)
Once inside the Isotherm menu it is possible to
enable a special colouring for objects included within
the set temperature interval. The parameters which
manage this function are:
1. Enable: Enables the Isotherm function.
2. Mode: Selects the way in which the interval is
indicated (in percentage or in degrees Celsius).
3. Upper: Sets the upper limit of the Isotherm
function.
4. Lower: Sets the lower limit of the Isotherm
function.
ISOTHERM
------------------------
1>ENABLE : N
2 MODE : PERCENT
3 UPPER : 95
4 LOWER : 90
Fig. 87
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
9.1.12.9 Status Menu
Once inside the Status menu it is possible to learn the
technical features of the thermal camera.
STATUS
------------------------
VERSION SW : 0A00.022B
FW VERSION : 0802.0040
CAMERA S.N. : 00001234
SENSORE S.N.: 00001234
TEMPERATURE : +0034.0
P.N. 41320035A-SPXXX
Fig. 88