Red Lion C48C - Manual (Page 20)

There are several ways to limit the programming of parameters from the front
panel keypad. The Accessible Value parameters are used with the Program
Disable DIP switch and an external programmable User Input selected for
Pro.dis to limit programming. To enter the programming mode, a code number
may need to be entered, depending on the Program Disable Setting. Front Panel
Function Key F1 cannot be selected for program disable. The following table
describes the possible program disabling functions.
-14-
Front Panel Accessible Functions With Program Disable
PGM.DIS.
SWITCH
USER INPUT TERMINAL
PROGRAM CODE
NUMBER
PROTECTED VALUE
MENU
OPERATOR ACCESS AT
MAIN DISPLAY
PROGRAM
DISABLE LEVEL
PROGRAMMING
ENABLED
OFF
INACTIVE or Not
Programmed for Pro.dis
ALL No
All displayed values
changeable
None Yes
OFF ACTIVE 0 No
Per Access Privileges
programmed
Level 1 No
OFF ACTIVE 1 to 99
Yes
W/code
Per Access Privileges
programmed
Level 1 No
OFF ACTIVE 100 to 199 No
Per Access Privileges
programmed
Level 1
Yes
W/code
ON
INACTIVE or Not
Programmed for Pro.dis
0 No
Per Access Privileges
programmed
Level 1 No
ON
INACTIVE or Not
Programmed for Pro.dis
1 to 99
Yes
W/code
Per Access Privileges
programmed
Level 1 No
ON
INACTIVE or Not
Programmed for Pro.dis
100 to 199 No
Per Access Privileges
programmed
Level 1
Yes
W/code
ON ACTIVE ALL No Viewable only Level 2 No