Vaisala viewLinc-4.1-M211518 - Manual (Page 64)

Adding Hosts
viewLinc 4.1 Administrator Guide 53
components are the number of seconds the probe is in
alarm before transmitting a beacon. 255 = disabled.
Adding Hosts
viewLinc 4.1 provides the option of adding multiple host
machines so devices residing on these host machines can
be added and monitored as locations.
To add a host machine:
1
From the Device Browser in Device Manager, select
Options | Add host .
2
The Add Host window appears. Enter the hostname or IP
address of the host you’d like to add.
3
Click
OK
. The viewLinc system will discover the host and
all devices residing on it. Device discovery on the new
host may take a few seconds to several minutes to
complete. You can continue with other activities during
the discovery process. You will be notified when the
process is complete. Click
Yes
when prompted to refresh.
Configuring Email Settings
Alarm notifications are sent via email, therefore
administrators must set Email Settings to properly send email
messages from your mail server. If you aren’t sure which
usernames and passwords to use or which check boxes to
enable, contact your IT Administrator.