Vaisala viewLinc-4.1-M211518 - Manual (Page 162)

viewLinc 4.1 Administrator Guide 155
9
Device ACLs will be created for the Admin group only.
Q: What happens with the sampling in viewLinc when I attach a
USB cable to a device for configuration etc.?
A: If a USB cable is attached to a device (i.e. the HMT140),
the sampling is interrupted. When the USB cable is removed,
the sampling is resumed. The sample timestamps will start
off when the cable is removed, and will not be an integral
number of sample rate seconds since the previous sample.
This should not affect operation. If the USB cable is attached
for a long time, greater than twice the Transmit rate, the
configuration alarms will occur for missing historical data.
They will clear once the sampling resumes.
Q: My upload keeps failing when using a file to upload logger info.
How do I upload successfully?
A: Check that you have separated your parameters with tabs,
not spaces, commas, etc. Only parameters entered as tab-
separated lines (TSV format) will work.
Q: How do I configure the viewLinc Web server for SSL security?
A: Enabling SSL (https://) on the viewLinc web server
requires the following steps:
Setting up the SSL port on a new installation.
When
installing viewLinc for the first time, the installer is prompted
for information on the web server: