Vaisala viewLinc-4.1-M211518 - Manual (Page 62)

Editing Channel Properties and Aliases
viewLinc 4.1 Administrator Guide 51
6
Click
OK
to save.
If you do not want to use the system default temperature
units (set on the
Options | System Configuration | Preferences
tab), you can modify the temperature units used for a specific
location. To clear existing unit preferences and accept the
system default, you will need to edit the location from the
Locations manager and select the option
Use System Default
.
To edit calibration properties:
1
From Options | System Configuration | Device Manager ,
select the Host and then the device whose channel’s
properties you want to edit.
2
Select the channel you want to edit.
3
On the
Options | Channel
menu select
Edit Channel
or
right-click and select
Edit Channel
.
4
In the Edit Channel Properties dialog box, make sure a
device which supports calibration properties is selected
(i.e. the HMT 140 Series Transmitter). Calibration
properties can only be edited once the initial values have
been downloaded from the device.