Vaisala viewLinc-4.1-M211518 - Manual (Page 107)

Device Alarms
viewLinc 4.1 Administrator Guide 97
2
On the Host or Device menu, select
Communication
Alarm Settings.
The Communications Alarm Settings
screen appears.
3
Deselect the
Enable Alarm
check box.
4
Click
Save.
Note:
You can also pause alarms - for more informa-
tion, see “Pausing Alarms” on page 101.
Device Alarms
Ensuring the continuous functionality of your device is
required for accurate real-time monitoring. Because of this,
viewLinc includes device calibration, validation and
configuration alarms to notify users if device functionality is
compromised at any point. By default, there are three device
alarms (in addition to the Device Communication alarm)
preconfigured for each device. These alarms cannot be
deleted; however, they can be edited.
Setting Device Alarms
To set a device alarm:
1
From the Device Browser in
Options | System
Configuration | Device Manager
, select the device you
want to set the device alarm for.
2
On the
Options | Device
menu select
Device Alarm
Settings,
then select the device alarm type you want to
set. The Alarm Settings screen appears.