Vaisala viewLinc-4.1-M211518 - Manual (Page 58)

Viewing Device Details
viewLinc 4.1 Administrator Guide 47
Additional properties are available for HMT140 Series
Transmitters:
•
Timeout:
Number of Seconds to wait for a beacon
before failing the ‘Add’ operation.
•
UDP Port:
The UDP port viewLinc uses to listen for
devices.
•
Max Blocks per Beacon:
The maximum size of the
backfill. It is limited to conserve battery life.
Note:
Do not change the ‘Max blocks per beacon’
property for HTM140 devices without first con-
sulting your technical support department as this
setting will adversely affect battery life.
•
Retry Count:
Number of times a beacon is transmitted
by the device if it fails to receive an ACK (acknowledge
response).
•
Transmit Period:
The frequency of beacon
transmissions
•
Sample Rate:
The frequency that samples are taken in
the device
Viewing Device Details
viewLinc provides extended device information in the device
details column of the device manager. To see this