DAVIS WeatherLink Getting Started Guide: Vantage Stations - Manual (Page 13)

11
Serial Port Hardware Installation
4. Firmly insert the data logger with serial connector into the receptacle
marked EXPANSION inside the battery compartment.
5. Guide the data logger cable through the square slot below the receptacle.
6. Reconnect the AC adapter, if present, and then reinsert the batteries.
The console beeps four times (Vantage Vue) or three times (Vantage Pro or
Pro2); each beep occurring within one second of the others. Once power has
been returned to the console, the Setup Mode is automatically displayed.
The Weather Envoy beeps two times, also occurring within one second of
each other.
7. Replace the battery cover so that the data logger cable exits through the
square slot.
Data Logger
8' (2.5 m)
Data Logger
Cable
COM Ports
Optional 40' (12 m) 4-Conductor
Extension Cable and Coupler
Connection
Options
(DB-9)
9-pin Connector
Vantage Vue Console
Connection
Options
8' (2.5 m)
Data Logger
Cable
Data Logger
Battery cover
Optional 40' (12 m) 4-Conductor
Extension Cable and Coupler
(DB-9)
9-pin Connector
COM Ports
Vantage Pro or Pro2 Console
Connecting your Computer Directly to your Weather Station