DAVIS GroWeather Console - Manual (Page 58)

Enabling/Disabling AutoClear
GroWeather Manual Page 51
3. Press and hold down CLEAR until a series of dashes replaces the alarm threshold on
the display.
Dashes in an alarm display indicate that the alarm is not active.
A LARM C LEARED
4. Press any function key to exit.
Each alarm threshold is independent of every other. For instance, clearing
the high air temperature alarm does not clear the low air temperature alarm.
You must clear each alarm individually.
E NABLING /D ISABLING A UTO C LEAR
The general procedure for enabling and disabling the AutoClear function for
individual weather conditions is covered below.
1. Press the appropriate key(s) to display the desired weather condition’s AutoClear dis-
play.
T YPICAL A UTO C LEAR S TATUS
2. Press ENTER to alternate the status between on and off.
3. Press any function key to save and exit.