DAVIS GroWeather Console - Manual (Page 33)

Using the GroWeather
Page 26 GroWeather Manual
2. To display the current soil temperature, press TEMP again.
The current soil temperature appears on the right of the display.
C URRENT S OIL T EMPERATURE
3. To display the current T-H Index, press TEMP again.
The current T-H Index appears on the right of the display.
C URRENT T-H I NDEX
4. To display the current wind chill, press TEMP again.
The current wind chill appears on the right of the display.
C URRENT WIND CHILL
5. To display the status of the AutoClear function for air temperature, soil temperature,
T-H Index, and wind chill (On/Off), press TEMP again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 51 for
instructions.)
Note: You cannot enable/disable the AutoClear function separately for air temperature, soil tempera-
ture, T-H Index, and wind chill. These functions are “linked” and AutoClear for them must be
either enabled or disabled together.
6. Continuing to press TEMP will cycle through the air temperature, soil temperature,
and temp/hum index displays in a continuous loop.