DAVIS GroWeather Console - Manual (Page 28)

EvapoTranspiration
GroWeather Manual Page 21
4. To display the date on which the current period started and the number of days in the
period, press ET again.
The date on which the period started appears on the right of the display. The
number of days in the period appears on the left of the display.
P ERIOD D ISPLAY
5. To display the status of the AutoClear function for ETo (On/Off), press ET again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 51 for
instructions.)
6. Continuing to press ET will cycle through all the ETo displays in a continuous loop.
Selecting Units of Measure
To select the desired unit of measure for ETo, simply press UNITS while
viewing any of the ETo displays (except AutoClear or Period). As you press
UNITS, the GroWeather alternates between inches (in) and millimeters
(mm).
S AMPLE ET O U NITS OF M EASURE