DAVIS GroWeather Console - Manual (Page 40)

Rainfall
GroWeather Manual Page 33
Viewing Rainfall
1. To display daily rainfall, press RAIN.
The amount of daily rainfall appears on the right of the display. The current
rate of rainfall appears on the left of the display.
D AILY R AINFALL
Daily rainfall represents the amount of rainfall since the last time you (or
AutoClear) cleared the daily rainfall register. For instructions on clearing
daily rainfall, see “Clearing Daily and Total Rainfall” on page 34.
2. To display the total rainfall, press RAIN again.
The amount of total rainfall appears on the right of the display.
T OTAL R AINFALL
Total rainfall represents the amount of rainfall since the last time you cleared
the total rainfall register. For instructions on clearing total rainfall, see
“Clearing Daily and Total Rainfall” on page 34.
3. To display the status of the AutoClear function for daily rainfall and the high rate of
rainfall, press RAIN again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See “Enabling/Disabling AutoClear” on page 51 for
instructions.) The current rate of rainfall appears on the left of the display.
Note: You may not enable/disable the AutoClear function separately for daily rainfall and high rate of
rainfall. These two functions are “linked” and AutoClear for them must be either enabled or dis-
abled together.
4. Continuing to press RAIN will cycle through the Rain displays in a continuous loop.